Description
we has one of the best selections of Aquamate Sealant online and
all below the standard RRP.
Not only is Aqua Mate high modulus it is also a reactive curing
silicone sealant specifically formulated for fish tank/aquarium
manufacture. This means that it remains permanently flexible and
forms a watertight seal against most surfaces with a low dirt
accumulation.
Not only will the waterproof seal withstand continuous water
immersion over a long period of time, it is also free from
fungicide and solvents, so it won’t harm fish when it’s cured.
Other benefits of Aquamate sealant include:
Fast curing formula gives extremely high early strengths and is
tack free in one hour
Extremely low dirt pickup
If you’re applying Aquamate sealant to your fish tank, we recommend
ensuring all surfaces are dry, clean and free from any flaky
surface coatings. If you have any leftover sealant or mastic joints
on your fish tank, make sure to remove before you apply your new
sealant.
Read our technical data and application specs below for more
information.
Technical Data & Application
Areas For Use
All sealing applications in aquaria.
Sealing of pond liners and all supply/drainage piping.
Limitations
On highly porous surfaces priming is advised.
Not for use on substrates that may bleed oils, solvent or
plasticisers.
As pond liner materials vary in quality, always test a small area
first for adhesion.
Always wash out ponds and aquaria after use to remove residual
acetic acid. Test pH before use.
Allow sealant to fully cure before moving/filling with water.
Surface Preparation
All surfaces must be clean, dry and dust free. All loose or flaking
surface coatings, and old sealant and mastic joints, should be
removed before application. All glass must be cleaned prior to use.
Application
The surfaces to be must be clean, dry and free from dust, grease
and other contaminants. Priming is generally not required. Glass
must be toughened or laminated. Do not use tempered glass
(shattering risk). The following guide is useful in choosing the
required glass thickness.
Curing Times
Skin Formation: 15 mins @ 23°C
Through Cure: 3mm per 24 hours
Storage
Store in cool dry conditions between + 5°C and 25°C.
Shelf Life
24 months from date of manufacture in original unopened containers
